Fluke Corporation MET/CAL Procedure ============================================================================= INSTRUMENT: Fluke 8060A: (1 year) CAL VER /5700 DATE: 11-Feb-95 AUTHOR: Fluke Corporation REVISION: $Revision: 2.3 $ ADJUSTMENT THRESHOLD: 70% NUMBER OF TESTS: 59 NUMBER OF LINES: 157 CONFIGURATION: Fluke 5700A ============================================================================= # # Source: # Fluke 8060A instruction manual (PN 632661 March 1982, Rev. 5, 1/93). # # Compatibility: # MET/CAL 4.0 or later # # Subprocedures: # None # # Required Files: # 57_8060.bmp # # System Specifications: # TUR calculation is based on specification interval of the accuracy file. # The default 5700A accuracy file contains 90 day specs. # # Fluke makes no warranty, expressed or implied, as to the fitness # or suitability of this procedure in the customer's application. # # The 90 day specifications of the 5700A are used in TUR computations. # STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON 1.001 ASK- N P F W 1.002 ASK+ K 1.003 MMFC C2 1.004 HEAD PRELIMINARY INSTRUCTIONS 1.005 DISP [32] WARNING 1.005 DISP HIGH VOLTAGE is used or exposed during the performance 1.005 DISP of this calibration. DEATH ON CONTACT may result if 1.005 DISP personnel fail to observe safety precautions. 1.006 DISP Turn the UUT on. 1.006 DISP As the UUT is turned ON, verify that all display 1.006 DISP segments momentarily light up. 1.007 EVAL Did the UUT {display test} pass? 2.001 DISP Ambient temperature: 18C - 28C. 2.001 DISP Relative humidity: less than 80%. 2.001 DISP Allow the UUT 30 min. to stabilize. 2.002 HEAD {DC VOLTAGE} 2.003 PIC 57_8060 2.004 HEAD DC VOLTAGE: {200mV Range} 2.005 5700 200 190.00mV 0.09U 2W 3.001 5700 200 -190.00mV 0.09U 2W 4.001 HEAD DC VOLTAGE: {2V Range} 4.002 5700 2 1.9000V 0.0009U 2W 5.001 HEAD DC VOLTAGE: {20V Range} 5.002 5700 20 19.000V 0.011U 2W 6.001 HEAD DC VOLTAGE: {200V Range} 6.002 5700 200 190.00V 0.11U 2W 7.001 HEAD DC VOLTAGE: {1000V Range} 7.002 5700 1000 1000.0V 0.7U 2W 8.001 HEAD {AC VOLTAGE} 8.002 HEAD AC VOLTAGE: {200mV Range} 8.003 5700 200 100.00mV 0.30U 50H 2W 9.001 5700 200 100.00mV 0.40U 10kH 2W 10.001 HEAD AC VOLTAGE: {Decibels} 10.002 DISP Select the dB function. 10.003 5700 -50.0D 1.0U 1kH O 2W 11.001 5700 -50.0D 3.0U 30kH O 2W 12.001 HEAD {FREQUENCY} 12.002 DISP Select the Hz function. 12.003 5700 100.00H 0.06U 20mV O 2W 13.001 5700 190.00kH 0.09U 100mV 2W 14.001 DISP De-select the Hz function. 14.002 HEAD AC VOLTAGE: {2V Range} 14.003 5700 2 1.0000V 0.0060U 50H 2W 15.001 5700 2 1.0000V 0.0060U 1kH 2W 16.001 5700 2 1.0000V 0.0070U 10kH 2W 17.001 5700 2 1.0000V 0.0140U 30kH 2W 18.001 5700 2 1.0000V 0.0500U 100kH 2W 19.001 5700 2 1.0000V 0.0110U 20H 2W 20.001 5700 2 0.1000V 0.0015U 50H 2W 21.001 5700 2 0.1000V 0.0050U 30kH 2W 22.001 5700 2 0.1000V 0.0230U 100kH 2W 23.001 HEAD AC VOLTAGE: {Decibels} 23.002 DISP Select the dB function. 23.003 5700 7.79D 0.10U 50H 2W 24.001 HEAD {FREQUENCY} 24.002 DISP Select the Hz function. 24.003 5700 19.000kH 0.009U 200mV 2W 25.001 DISP De-select the Hz function. 25.002 HEAD AC VOLTAGE: {20V Range} 25.003 5700 20 10.000V 0.060U 50H 2W 26.001 5700 20 10.000V 0.070U 10kH 2W 27.001 5700 20 10.000V 0.140U 30kH 2W 28.001 5700 20 10.000V 0.500U 100kH 2W 29.001 HEAD AC VOLTAGE: {200V Range} 29.002 5700 200 100.00V 0.60U 50H 2W 30.001 5700 200 100.00V 0.70U 10kH 2W 31.001 5700 200 100.00V 1.40U 30kH 2W 32.001 5700 200 100.00V 5.00U 100kH 2W 33.001 HEAD AC VOLTAGE: {750V Range} 33.002 5700 750 750.0V 8.5U 100H 2W 34.001 5700 750 750.0V 8.5U 1kH 2W 35.001 HEAD {RESISTANCE} 35.002 HEAD RESISTANCE: {200 Ohm Range} 35.003 5700 200 0.00Z 0.04U CW 36.001 5700 200 100.00Z 0.11U CW 37.001 HEAD RESISTANCE: {2 kOhm Range} 37.002 5700 2 1.0000kZ 0.0009U CW 38.001 HEAD RESISTANCE: {20 kOhm Range} 38.002 5700 20 10.000kZ 0.009U CW 39.001 HEAD RESISTANCE: {200 kOhm Range} 39.002 5700 200 100.00kZ 0.09U 2W 40.001 HEAD RESISTANCE: {MOhm Range} 40.002 DISP Set UUT to the MOhm range. 40.003 5700 1.0000MZ 0.0017U 2W 41.001 5700 10.000MZ 0.05U 2W 42.001 HEAD {CONTINUITY TEST} 42.002 5700 2 0.1000kZ 0.0003U CW 43.001 DISP Press the -><-))) button. 43.002 EVAL Is the {-><- symbol visable on the display}? 44.001 DISP Press the -><- button again to enable the audible tone. 44.002 5700 0.1000kZ S CW 44.003 EVAL Is the {audible tone on}? 45.001 5700 * S 45.002 EVAL Is the {audible tone off}? 46.001 EVAL Is the UUT {displaying OL}? 47.001 HEAD {CONDUCTANCE} 47.002 HEAD CONDUCTANCE: {2000nS range} 47.003 5700 2000 1000.0nY 7.0U 2W 48.001 MATH MEM1 = 0.0 48.002 MEMI Enter UUT reading in nanosiemens: 48.003 MEME 48.004 MEMC 2000 nY +0.2U 49.001 HEAD {DC CURRENT} 49.002 HEAD DC CURRENT: {200uA Range} 49.003 5700 200 190.00uA 0.40U 2W 50.001 5700 200 -190.00uA 0.40U 2W 51.001 HEAD DC CURRENT: {2mA Range} 51.002 5700 2 1.9000mA 0.0040U 2W 52.001 HEAD DC CURRENT: {20mA Range} 52.002 5700 20 19.000mA 0.059U 2W 53.001 HEAD DC CURRENT: {200mA Range} 53.002 5700 200 190.00mA 0.59U 2W 54.001 HEAD DC CURRENT: {2000mA Range} 54.002 5700 2000 1900.0mA 5.9U 2W 55.001 5700 2000 -1900.0mA 5.9U 2W 56.001 HEAD {AC CURRENT} 56.002 HEAD AC CURRENT: {20mA Range} 56.003 5700 20 19.000mA 0.152U 1kH 2W 57.001 HEAD {DIODE} 57.002 DISP Select the DIODE Function. 57.003 EVAL Is the UUT {display OL}? 58.001 5700 1.0000kZ 0.1000U CW 59.001 END